11 best screw juicers

The essence of the screw equipment:

• products are put in the loading compartment,
• the screw rod captures the raw materials, grinds, squeezing the liquid,
• the cake obtained during the spin process is discarded.

The technique of this type is divided into two main categories - horizontal and vertical. To receive a drink from the first type, a pusher is installed in the equipment. Accordingly, the mechanism is time-consuming, but the user can get drinks from fresh herbs, parsley, onions and other herbs.

The design of the screw in horizontal juicers is designed so that the cutting occurs automatically, tightening the products. That is, the liquid can be obtained without the participation of a pusher.

The vertical technique is equipped with a high-strength plastic screw. A mesh is made from a similar material to prevent a break at the time the press is under load.

Advantages and disadvantages

Pros:

1. Productivity - the minimum coefficient of extraction of raw materials is 70%, that is, two times higher than centrifugal devices. At the same time, the level of waste is low, and the cake is almost dry,
2. The end result is a homogeneous structure of the drink, without interlayers,
3. Power saving The engines installed in this type of device operate at speeds from 40 to 80 per minute. Thus, the power of the motors reaches 200 watts,
4. A diverse assortment line. Models on the market from different manufacturers grind hard and soft raw materials. For example, vegetables, fruits and berries are processed qualitatively. Twin-screw representatives are able to extract oil from seeds,
5. Quiet operation of appliances. Devices operating at low speeds produce a sound effect of up to 50 dB. Quality models operate at a level of 30 dB. Therefore, the process of obtaining juice brings pleasure to the hostesses.

Note: high-quality spin nets are made of stainless steel. This material is easy to care for and has a high service life compared to plastic parts.

1. Selection of raw materials. The design of the screw is presented in the form of a narrow receiving neck, so laying an entire apple of medium or large size is impossible. It is necessary to first divide the fruit into segments,
2. Time spent on processing. The mechanism has a complex structure in comparison with centrifugal models,
3. Limited process - after 30 minutes of continuous operation, the motor heats up. In high-quality devices, at this moment, the protective system that prevents overload is activated,
4. The cost of screw devices starts from 4500 rubles.

The equipment is classified into the following types:

1. Manual control similar to a meat grinder. A simple mechanism that can be equipped with an additional nozzle. The process takes a lot of time and effort, but at the same time the raw materials at the exit are of satisfactory quality,
2. The twin screw type is equipped with a simple design. The user receives the maximum amount of drink

90% of the fruits and vegetables used.

The best of the screw juicers are selected depending on the location of the device - horizontal or vertical.

Horizontal

In appearance, the technique is identical to an electric meat grinder. The essence of the work is that there is a shallow cutting of raw materials, and then the user loads the products into the compartment. After processing large pieces, small ones should be pushed through.

• in some models it is possible to grind coffee beans, cinnamon, spices and cereals,
• soft raw materials in a few minutes turns into a homogeneous consistency,
• low price.

• the need for additional manipulation,
• time costs.

Vertical

The compact size and lean extraction make the process of working vertical equipment as efficient as possible.

• performance,
• the wide acceptance neck of some models eliminates the need to cut products,
• stylish design,
• easy care.

• long spin process
• budget equipment is equipped with a narrow loading compartment.

Production material

The case is made of two materials:

1. Plastic is light in weight and cheap. Differs in simple leaving. If you choose an assembly of high-strength material, then the equipment will serve for many years. However, over time, such products lose their original white color,
2. Steel is heavy with a long service life. However, the metal does not resist coloring pigments.

The auger is made of aluminum, steel and cast iron. Manufacturers additionally produce models with a plastic screw for those who have fears of a metallic taste in the drink.

Size and material of filter mesh

The filter membrane is a fixed part and is responsible for the texture and concentration of the drink. In the presence of large holes in the grid, the juice will be obtained with pulp. Representatives of the premium segment are equipped with a stainless steel filter that prevents the oxidation process. By purchasing technology as a citrus fruit press, you can save by choosing an economy class model with a plastic filter.

Budget representatives

Model	Specifications
	ENDEVER SIGMA 92

The vertical technique is designed to create natural drinks from almost any product. With the help of the device, housewives receive juice from herbs, herbs and seeds. The model works on the principle of "cold pressing", so that there is no heating and oxidation of the liquid. The resulting nectar retains its beneficial properties, taste and aroma.

• direct serving of a drink in a glass,
• liter working capacity
• anti-drip system resists spillage,
• automatic spinning with the collection of pulp in a separate container (0.8 liters),
• performance,
• no vibration during operation,
• power 200 W
• stainless steel filter mesh,
• The kit includes a fruit loading tray and a care brush,
• rubber base
• reverse
• child protection
• The price is 4500-4700 rubles.

Cons: not identified.

UNIT UCJ 419

A single-screw representative with a vertical arrangement qualitatively extracts liquid from various vegetables, berries and fruits.

• overload protection system,
• accidental lock
• automatic release of pulp into a container (0.6 liters),
• direct spin to working capacity,
• drop-stop system
• centrifuge manufacturing material - stainless steel,
• quiet work
• dry cake at the exit,
• easy care
• rubber feet for stability,
• the price is 5500-5790 rubles.

• 1 speed
• low revolutions (65 per minute) and an average power rating of 150 W,
• work glass 0.6 l.,
• whimsical to boot sizes.

KITFORT KT 1101

Vertical stylish model is supplied to the Russian market at a price of 5700-5900 rubles. The equipment qualitatively processes all types of raw materials, including tough products.

• overload warning system
• high product yield

95% of the original raw materials,

dry meal

filter auto cleaning

high-quality high-strength plastic,

silent work

bright design

auto-release of pulp into a glass,

drink level sensor

rubberized base.

• power 150 W
• low productivity.

Note: a juice container is required to collect the prepared drink. The tank can be built into the body or supplied as a jug or glass.

Middle price segment

Model	Specifications
	MOULINEX ZU 255B10 INFINY JUICE

Stylish, compact model of French production. The device is equipped with a single screw, operating at a speed of 60 rpm with an electric drive power of 200 watts.

• direct drink system
• 0.8 liter work cup
• drip system
• pulp discharge into a separate tank 0.8 l,
• stainless steel case.

Cons: price 8790-9999 rubles.

PANASONIC MJ L500

The technique is a vertical type with advanced functionality and an optimal cost (11500-11890 rubles).

• two speeds
• rubberized anti-slip feet,
• direct drink into glass system
• drop-stop function
• automatic release of pulp into a container of 1.2 liters,
• smooth work
• the presence of a thermostat,
• filter self-cleaning option,
• silent work.

• low engine power 150 W,
• raw material processing speed of 45 rpm,
• high price.

PHILIPS HR 1947 Avance Collection

The horizontal type device is able to maintain the maximum amount of nutrients in the drink. Intelligent technology provides 90% of the juice from nuts, herbs and other products.

• fast cleaning due to lack of sieves,
• compact dimensions (11 cm in length),
• light weight
• automatic release of pulp into a liter tank,
• power 200 W
• working capacity 1 liter,
• pre-cleaning option,
• protection against accidental start,
• quiet work
• simple operation
• it is completed with a loading tray,
• direct feed function.

• short power cord - 1 m.,
• the price is 25490-25999 rubles.

Note: freshly squeezed citrus juice is recommended to use after cooking. Therefore, manufacturing companies produce equipment designed to create 1-2 glasses of drink.

Premium class

Model	Specifications
	TRIBEST SoloStar-3

The horizontal functional model is made in retro style. It is equipped with nozzles for creating spaghetti and fettuccine. A universal technique with which you can prepare juices, minced meat and grind solid products.

• flyback option
• pulp consistency setting,
• fluid level sensor
• blocking from accidental start,
• direct feed function
• drip system
• foam separator,
• ease of care
• dry meal
• power of 180 watts.

Cons: the price is 27100-27999 rubles.

HUROM Alpha H-AA-BBE-17

The peculiarity of the vertical model of the HUROM Alpha company is the presence of two nets for making smoothies, as well as a grinder without holes for creating children's puree.

• making ice cream, pasta, juices, etc.,
• quiet operation 39 dB
• direct feed system
• drop-stop function
• working container 0.5 l,
• auto pulp ejection,
• modern design,
• 10 years warranty period from the manufacturer,
• high-quality processing of solid products,
• dry cake at the exit.

• power of 150 W and insufficient torque (43 rpm),
• the price is 28999-29450 rubles.

TRIBEST GreenStar Elite GSE 5300

The twin-screw model is presented by the manufacturer in a rich configuration, which contains the nozzles necessary for the home and professional purposes. Horizontal equipment is characterized by high productivity (200 W power) and the ability to prepare drinks, chop meat and grind solid products.

• juice glass 0.9 l,
• direct fluid supply
• drip system
• smooth motor operation
• silent running
• blocking from accidental start,
• In a set - a loading tray and a brush for cleaning,
• liquid level scale
• rubber base
• network cable 1.4 meters,
• the presence of a spout for making bread sticks,
• the ability to process various raw materials, including spices, nuts, dough.

Negative points: the price is 54800-58000 rubles.

Criteria for choosing a screw juicer

1. Form factor. Screw type juicers can be horizontal or vertical. The former work more slowly and need a pusher, so they are only suitable for squeezing juice from herbs. In other cases, vertical models will do better. We considered them in the rating.
2. The number of screws. Most users have one. This is the type that most devices on the market apply to. If you prefer to make juices from fibrous and solid fruits, then it is better to buy solutions with two screws.
3. Power. Despite the general misconception, an increase in this parameter does not mean an improvement in the ability of the unit to cope with a large number of products. The optimal value is a range from 200 to 500 watts. But if the model allows you to smoothly adjust the speed, it can be more powerful.
4. Capabilities. Functions “drop-stop” and automatic ejection of pulp are today in almost any screw juicer. Therefore, you need to look at other options, such as protection against accidental switching on / overload, the possibility of making smoothies, mashed potatoes and various desserts, the function of the mill, and so on.
5. Manufacturer. Not the most important, but not the least important parameter. European companies like Philips or Moulinex are valued on the market. True, their price corresponds to quality and capabilities. If you want to buy something similar, but cheaper, then look at domestic counterparts like Redmond or Kitfort.

TOP-11 of the best screw juicers 2020

It was not difficult for us to choose decent models. But to choose among them only the top ten juicers was not so simple. Therefore, we decided to trust the opinions of real buyers, who perfectly complemented our personal experience. As a result, we were able to collect the TOP-10 wonderful screw juicers for squeezing juice from 8 popular brands. They differ in cost, but please with consistently high quality and efficiency.

1. Oberhof DRUCKEN Q-12

A German-made juicer with a two-turn screw, which squeezes up to 90% of juice from fruits and vegetables, is a powerful device for home use. High engine power (400 W) in combination with SST technology allows you to get 35% more juice from products than when using similar devices. When working, it almost does not make noise, the noise level reaches 40-60 dB.

Advantages:

• plastic and stainless steel case, characterized by ease of maintenance and high strength,
• auger made of high-strength Ultem medical plastic that prevents the growth of bacteria,
• automatic pulp ejection function,
• large diameter of the feed opening,
• reverse with maximum extraction,
• automatic shutdown when overheating.

Disadvantages:

• quite a lot of weight - 8.35 kg.

2. REDMOND RJ-912S

It is difficult to call an inexpensive juicer worth about 12 thousand, but in the case of the RJ-912S model from the Russian company Redmond, this title is fully justified. The unit comes in a beautiful black box with an attractive design. However, not only the packaging, but also the device itself pleases with beauty. After unpacking, it will probably immediately go to the countertop, and stay there.

The REDMOND RJ-912S is controlled via the touch panel at the front. There are also light indicators informing about the operating mode.

The rated power of the best in terms of price-quality ratio of a screw juicer is 200 W, and the maximum can reach 580. The noise level declared by the manufacturer for the RJ-912S is 74 dB, which is quite noticeable. The capacity of the reservoirs for pulp and juice supplied with the device is 700 ml and 1 liter, respectively. The juicer delivery set also includes a company recipe book.

Advantages:

• thoughtful management
• takes up little space
• Great design
• there is a self-cleaning function,
• reasonable cost
• spin efficiency.

Disadvantages:

3. Kitfort KT-1106

KT-1106 is a budget model of a screw type juicer, manufactured under the Kitfort brand. It has a beautiful appearance, relatively quiet operation, a power of 260 watts and a wide neck for loading vegetables and fruits. There is only one speed here - 48 rpm. Pulse mode is also present.

One of the advantages of a household appliance is a long 1.5 meter power cable, which makes using a juicer more convenient. The unit is equipped with a coarse filter, as well as a pair of filters for fine cleaning, so that the juice is homogeneous and does not contain pulp impurities.

Features:

• almost completely dry meal,
• ease of cleaning
• moderate noise level at work,
• grinds even hard vegetables
• high quality materials
• ease of maintenance
• long power cord.

4. LINNBERG XL

The next position was taken by the juicer, which is often chosen by customers - LINNBERG XL. This device uses an advanced security system, which eliminates the accidental inclusion and overload of the device. An engine with a power of 240 W starts here smoothly, which increases its service life. The maximum motor speed in the XL model is 55 rpm. In addition to the only speed in the device there is an option "Reverse". For cleaning the juicer, a brush is included.

Advantages:

• reasoned price tag,
• low noise
• work of protective functions,
• effectively squeezes juice
• easy to assemble and disassemble,
• compact and beautiful.

Disadvantages:

• Only one tank included.

5. Oursson JM7002

The next place in the list of the best screw juicers is held by the well-known company Oursson with its first-class model JM7002. The power of this unit is 240 watts, and the width of the neck for casting berries, vegetables and fruits is 75 mm.

If you want to squeeze juice daily and do not plan to hide the juicer in a box, then its design is probably important for you. With the JM7002, you not only get a beautiful device, but you can also choose its color. Part of the case here is always black, but its base can be light green, red or orange.

In a good screw model of Oursson juicer, only one speed and the ability to turn on the reverse are available. There is also a self-cleaning function, and if it could not cope with pollution, then you can manually carry it out with a complete brush.

Advantages:

• wide neck
• optimum power
• squeezes juice perfectly,
• almost no noise at work,
• convenient to use,
• quality materials.

Disadvantages:

6. Moulinex ZU 255B10 Infiny Juice

The ZU 255B10 model is one of the best juicers in customer reviews available in the Mulinex lineup. Her case is made of durable stainless steel and high-quality plastic. The kitchen assistant offers a single speed of 60 rpm and a reverse function. The power of a stylish round neck juicer is 200 watts. The device works almost without noise, easy to assemble and disassemble, just washes. For juice and pulp, two separate tanks with a volume of 800 ml each are provided. Also included is a convenient loading tray.

Pros:

• strong case
• works quietly
• great design
• easy to disassemble and wash.

Minuses:

7. Kitfort KT-1104

Next in line is another Kitfort single screw juicer. The KT-1104 model pleases with reasoned cost, stylish appearance, reliability, as well as compact dimensions, thanks to which there is a place for the device in any kitchen. In the reviews, the juicer is praised for its high power (240 W) and speed (the only mode at 70 rpm). All Kitfort KT-1104 components are made of high-quality plastic, and the working elements are made of durable metal.

Advantages:

• stainless steel filter
• smoothie nozzle
• excellent equipment
• Four anti-skid legs
• quickly and efficiently wring out
• high-quality materials of the case,
• large diameter feed neck,
• attractive cost.

Disadvantages:

• bad for soft fruits.

8. Philips HR1947 Avance Collection

If you ask real buyers what is the best screw juicer suitable for home, then HR1947 Avance Collection from Philips, a well-known brand in Russia and the world, will definitely be mentioned among the popular answers. This is not the cheapest juicer, but its price is 100% justified. The device has an attractive and concise design. The cake compartment is placed in the housing, and its volume is 1 liter. The same capacity in the complete juice tank, which is installed nearby. Among the useful features of the device, it is worth highlighting protection against accidental switching on and the preliminary cleaning function. Of the minuses, one can only mention a short power cord.

Advantages:

• reliable metal case,
• steady rubberized legs,
• it is possible to adjust the amount of pulp,
• protection against accidental start,
• capacity of containers for juice and pulp,
• good power level of 200 watts.

Disadvantages:

• narrow neck
• cable length is only 1 meter.

9. Tribest Slowstar SW-2000

The top three is opened by a vertical screw juicer, which is distinguished by the highest price in the review - Slowstar SW-2000. This unit is manufactured by the South Korean company Tribest, which already guarantees its excellent quality. Thanks to a power of 200 W, the device quickly and efficiently squeezes juice, for which a 1 liter tank is provided in the kit. The same volume and the container for collecting pulp.

Do you want to choose a high-quality model of a juicer with capabilities for any need? Then the SW-2000 is exactly what you need. Here you can cook not only juices, but also smoothies, fruit purees and other foods. To do this, a set of nozzles, including a chopper, is supplied with the unit.

The maximum rotation speed of the Slowstar SW-2000 engine is 47 rpm. Among the useful functions of the device for squeezing juice can be noted a smooth start of the motor, as well as protection against accidental switching on. On the table, the device is very confident, for which it is worth praising quality rubberized legs. In use, the Tribest juicer has shown itself only on the positive side. Yes, and a long warranty for 10 years is also an important advantage of the reviewed model.

Advantages:

• high-quality unit
• long warranty
• the convenience of use,
• excellent power
• spin efficiency
• durability and reliability
• additional functions.

Disadvantages:

10. Hurom H100 Series H-100-SBEA01 / BBEA01 / DBEA01 / EBEA01

And now we will answer the question of which company is the best juicer. The opinion of our editors this time turned out to be unanimous, and the Hurom brand was named the most worthy manufacturer. Its luxury model, the H100 Series, offers luxury in every detail. The manufacturer claims that this is the first juicer in the world based on a unique meshless technology. In practice, this means the absence of juice oxidation, the ease of washing of components, the absence of oilcake under the screw, as well as completely silent operation. The latter, of course, is not entirely true, but almost. But the rest is fair.

The case of the H100 Series H-100-SBEA01 is entirely made of plastic, sometimes stylized as metal. In general, there are no complaints about the build quality and reliability, but for 38 500 rubles I want to see full metal elements in the unit. An excellent juicer for solid fruits and vegetables is driven with a three-position wheel. Cake basket is made of durable plastic tritan. The pulp enters it through a special valve, which opens automatically at overpressure.

Advantages:

• premium appearance
• juices are stored for a long time after extraction,
• easy to wash after use,
• modern gridless spin technology,
• durability and service
• silent operation
• convenient stand for a glass.

Disadvantages:

• no cable compartment,
• the case is not made of metal.

11. Hurom Alpha Plus H-AA-SBE19 / LBE19 / BBE19 / EBE19

And finally, the best TOP screw conveyor juicer we consider is another Hurom model, the long name of which you can see above. It is more accessible and offers similar characteristics, which ensured the device first place. The power level declared by the manufacturer is 150 watts. The device uses automatic pulp ejection, direct juice supply and a drop-stop system is used.

When buying a Hurom juicer, the user will receive a nozzle for grinding, a stand for storage and drying, a grid for smoothies and juices without pulp.

The unit is controlled via a switch on the rear panel. There is also a cable holder 140 cm long. Unfortunately, it is impossible to hide it in the case. If you want to buy a powerful juicer that can decorate the kitchen, then the Alpha Plus H-AA-SBE19 is perfect for this. The combination of rigor and elegance, as well as several color options, among which are black, gray, bronze and red, make this model an ideal solution in all respects.

Key Features:

• simple operation
• loading tray
• good equipment
• optimum power
• practicality and reliability
• beautiful design
• long power cord.

Which screw juicer is better to buy

With an unlimited budget, choose one of the devices included in the top three. They are expensive, but very high quality and best squeeze juices from vegetables, berries and fruits, leaving the cake only slightly moist. A slightly cheaper solution will cost from the Dutch brand Philips, offering very decent features for its price. Want to save money by getting a reliable unit? We recommend the best models of screw juicers from Russian manufacturers Kitfort and Redmond. A good alternative to the latter is the XL model from the international brand LINNBERG.

Types of Screw Juicers

Screw juicers are divided into two types:

The device of the first type: the screw, namely its screw, is arranged in it in such a way that it not only cuts the products, but also sucks it, as a result of which the juice is squeezed out without the help of a push mechanism. The screw is made of special durable plastic. Durable material is also used to make the filter mesh. The grid is a special metal plexus that avoids breaking it even with significant workloads.

The device of the second type: the pusher mechanism is the basis of the work. This technology significantly increases the operating time of the device.

If the financial situation allows, then it is worth paying attention to the premium price segment juicers. In most professional models, body parts and accessories are made of high-quality stainless steel. Thanks to these solutions, the lifespan of juicers, even at high loads, is longer. Professional devices are able to squeeze juice from almost any product.

To choose the optimal juicer, you need to determine the amount that the buyer is ready to give for it.

Budget devices, as a rule, are made of inexpensive materials, therefore their service life is less. And such juicers do not cope with all vegetables and fruits.

How to choose a juicer

Screw juicers are equipped with a low-speed engine and a power of 150-250 watts. To make the final choice, you should pay attention to the following criteria:

1. Material. In order not to be disappointed with the purchase, it is better to give preference to Korean-made devices. In Korea, only high-quality materials are used to make juicers. Chinese manufacturers are trying to catch up with their competitors and improve the quality of their products, but so far they have not succeeded. Cheap kitchen appliances cannot boast of high reliability.
2. Functional. Making a choice in favor of a particular juicer must be done on the basis of the required set of functions required by the buyer. To get juice from citrus fruits - you need to buy one machine, for grass and berries - it’s completely different.
3. Noise. A kitchen appliance that creates a lot of noise is unlikely to please its owner. In this matter, the choice is made on an individual basis, so among the screw juicers there are both quiet and fairly loud devices.
4. Power. This criterion is one of the most important to which you should pay attention when buying. The higher the power, the higher its performance and functionality.
5. Equipment. Each juicer has a certain set of additional devices in the form of nozzles and other tools. As a result of their application, it becomes possible to work with any products.
6. Sizes. The undoubted advantage of such devices is their compactness and low weight.

Rating of the best screw juicers

Model	Than good
Kitfort KT-1104	Stylish and easy to use.
Panasonic MJ-L500	One of the best in performance quality
REDMOND RJ-930S	Convenient model with high-quality spin
RAWMID JDM-80	One of the most practical models
KitchenAid 5KVJ0111	One of the most ergonomic juicers
Philips HR1947 Avance Colletction	The best friend of any hostess

Panasonic MJ-L500

Compact and easy-to-use screw extractor with high performance. Panasonic MJ-L500 harvests vegetables and fruits, herbs and berries. Through the integrated filter, the juice comes out almost without pulp. The product is quite easy to assemble / disassemble, wash, does not vibrate during operation, like its centrifugal counterpart. But at the same time, vegetables and fruits must be finely chopped before laying - the food inlet is small, but most models of this type suffer from this. The manufacturer provides a drop-stop system, as well as automatic pulp ejection. Special attention deserves a special nozzle for the preparation of sorbet. At the same time, the model is dressed in a reliable steel case.

• Small dimensions
• Easy to clean
• Quiet (relatively centrifugal)
• Includes sorbet nozzles
• Easy to assemble

• Effective only for solid foods. Products have to be finely cut to a width of not more than 2 cm
• Small food hole
• It is necessary to wash the mesh thoroughly
• Can plug for cake
• Price

REDMOND RJ-930S

The REDMOND RJ-930S screw juicer is an unrivaled novelty in a number of top models. A juicer has a number of enviable benefits. The 930S is surprisingly easy to use, and it’s very easy to clean. You will enjoy natural freshly squeezed juice and ease of maintenance. REDMOND juicers are the perfect way to squeeze out all the juices.

• Compact size
• Stable with rubber Velcro feet
• Roomy glass
• Low noise
• Price (compared to similar professional models)

• It is difficult to clean the nose of the cake
• Body material
• Small hole for loading fruits and vegetables
• Small cake outlet - inconvenient to wash
• No strainer

KitchenAid 5KVJ0111

The powerful kitchenAid premium juice squeezer is equipped with a screw rotating at low speed, which allows high-quality processing of almost any vegetables, fruits and berries, and separates the finished juice from the meal. A 0.8 liter juice tank makes this juicer well suited for use by a single user or in a small family. The power of the KitchenAid 5KVJ0111 juicer is only 250 watts, while it reaches a speed of up to 80 rpm. The device is equipped with a reverse function to clean a jam cake or fruit seed, which turns the screw in the opposite direction and easily removes unprocessed product. The foam separation mode separates the foam from the finished juice, cleansing it. Automatic pulp ejection simplifies the cleaning of the device itself from recycled particles and sends them to a separate container.

• Beautiful, stylish.
• Easy to disassemble and clean.
• Works quietly
• Wide neck

• Cannot cope with carrots and other hard vegetables
• Dimensions, weight

RAWMID JDM-80

The screw juicer Dream Juicer Modern DJM-80 is a universal juicer for fresh juice at home. It has an attractive design, compact dimensions and a number of additional features. Rawmid juicer features a wide neck of 80 mm, touch control and 9 operating modes.

• Silent work
• Quality housing materials and components
• Compact
• Can be used for cutting salads
• Slow auger rotation - meaning gentle spin

• Limited range of spin products
• The amount of juice obtained is less than that of a centrifugal juicer

Kenwood JMP 600

The Kenwood JMP 600 WH juicer is designed for those who like to drink natural freshly squeezed juices.Such drinks contain a large number of useful substances and vitamins, they are perfectly absorbed by the body and help us to be in good shape. This model of juicer is able to prepare juice from vegetables, fruits, berries, herbs, nuts and soy. In this case, you get a larger amount of drink and a minimum of waste. The case is made of high quality plastic. It has compact dimensions, so it does not take up much space in the kitchen. Get it and treat your family and guests to healthy drinks.

• Works quietly
• The output is almost dry cake
• Easy to assemble and wash
• Design
• Slow spin

• Small backlash

Philips HR1947 Avance Colletction

Philips High End Juicer. Effectively processes any fruits and vegetables so that the amount of waste is minimized, and the production of natural juice reaches 90%. It handles the processing of fruits that are high in starch (such as mangoes or bananas), as well as greens and nuts. You can add spinach, wheatgrass and almonds to the juice - they will enrich the drink with fiber and other useful elements. Removable parts and rounded elements of the product facilitate quick and easy cleaning: the pulp container is easily removed and then rinsed easily and simply with water. There is a convenient system for supplying juice directly to the glass, and the drop-stop system prevents leakage of juice from the nozzle - you just need to lift it up after completion of use. A nice addition to the juicer will be a recipe book that will help you choose the original combination to taste.

• Easy to disassemble and clean.
• Processes a wide range of fruits and vegetables
• Does not slip on the table - there are rubber legs
• Squeezes a lot of juice

Auger Juicer Reviews

Review of the Philips HR 1947 juicer

The most important plus is that it is cleaned quickly and easily. For me, this is the most important advantage, because I do not want to wash the details of the juicer for a glass of juice. Here the whole process takes 10 minutes maximum. And the second significant plus, it works very quietly (they squeezed the juice while the little son was sleeping peacefully). At the first start, the turbines were ready for the roar, but were very much surprised at the silence of the move.

In general, I want to say that it is very powerful, squeezes the juice to the last drop, scraps are very dry (it is stated that you can squeeze juice even nuts - we want to try), you do not need to clean out the bones and peel (for example, from kiwi), nothing extra will fall into the glass , no heap of foam on top and quick settling of the pulp (stratification of the juice). For the little son they made banana pudding. In general, if you are thinking about buying a juicer, I recommend Philips HR1897 / 30

Review of the Redmond RJ-930S screw juicer

For me, an excellent juicer for the money (bought for 4290), we use it for three months, the juicer copes with its function 100%. It is incomparable with centrifugal juicers: the juice from it is homogeneous without foam and completely different in color, unoxidized, quiet, compact, has no vibration, and consumes little electricity. It differs from analogs in compactness and quiet operation. The disadvantages are incomparable with its advantages. Satisfied with the purchase. Recommended!

Every few months, the rating is updated and updated with new products. A definite answer to the question: “Which screw juicer is better?” - no. There are enough worthy options on the market to make such a purchase for every taste and budget.

Varieties of screw juicers

Among all the models of screw juicers on the market, these types stand out.

Vertical

The screw and the entire driving mechanism are located vertically. The auger grabs and cuts the fruit, the pusher during extraction is practically not required. Dimensions in width for such models are small, but can reach high heights. They are distinguished by the highest speed among other designs, comparable with the average rate of a centrifugal juicer.

Horizontal

The difference in the location of the screw, as the name implies, is horizontal here. The height of this design is less than the previous one. Demanding on cutting raw materials before sending to the neck, since its diameter is less than that of the vertical. By analogy with a meat grinder, it is often necessary to actively use the pusher. The work is slower.

Twin screw

The design uses two screws at once, which increases the amount of product processed at one time, even if it is solid or fibrous. This is a relatively young device that has become fashionable along with professional blenders in the wake of the fashion for healthy eating and eating raw fruits.

See also - Rating of the best home juicers in 2019

Pros and cons of screw juicers

• Very good result. The minimum spin ratio is 75%, this figure is twice as much as that of centrifugal structures. All escaping residues are almost dry.
• The resulting juice is homogeneous, not stratified.
• Consumes energy efficiently. For this mechanism, you do not need to use powerful motors, since the auger rotates at a speed of only 40-80 rpm. Enough engine 200 watts, which consumes a small amount of electricity.
• Large selection of products used. The screw juicer is able to grind almost any product - soft, hard, fibrous or small. They can even squeeze out oil from the seeds.
• Silent work. A small screw speed does not create much noise, on average this figure is about 50 dB, in models with high build quality and sound insulation, the noise is not more than 30 dB.
• Long shelf life of juice - during its manufacture there is no warm air, which slows down the oxidation process. It can be stored up to 48 hours.

• Preparation of products. Design features require preparing fruits for squeezing juice, too large should be cut into several parts, which will go into a narrow neck.
• The duration of the process. Compared to the more complex structure of centrifugal models, augers are not able to quickly process large quantities of raw materials.
• Limited time. After 30 minutes of heavy use, the interlock thermostat activates and turns off the engine, protecting it from overheating.
• Higher cost in comparison with centrifugal.
• There may be some pulp in the finished juice.

See also - How to choose a blender for home in 2019

What to look for when choosing

1. Screw manufacturing material. The most important part, more important than engine power. In budget models, screws are made of aluminum. It is better to choose juicers with screws made of steel or cast iron. High quality plastic also works well, it is durable, does not distort the taste and quality of the juice.
2. Size and material of the mesh filter (membrane). Made of steel and plastic. Steel is used that does not oxidize in contact with fruit juice, but if you plan to process a product of the same type, you can do with a plastic mesh. The size of the holes affects the texture of the juice and the amount of pulp in it.
3. Body material. Plastic or metal. The plastic used is safe, durable and easy to clean. But it is better not to choose white models, they quickly turn into the color of vegetables and fruits. Steel models have more weight, but are more durable in operation.
4. The number of screws. If you examine user reviews, then one screw is enough for the production of juice from simple fruits and vegetables. But if you plan to make juice from greens, squeeze oil from nuts, seeds and cereals, then it is better to choose models with two screws.
5. The presence of reverse. Not present in every model, but very useful if necessary to clean the auger. When the reverse is turned on, the screw starts spinning in the other direction, cleaning itself from pieces of raw materials stuck on it.
6. Number of speeds. Models with a single speed are most popular, as a larger number of speeds adds to the cost. According to user reviews, the number of speeds has little effect on the work, so you should not overpay for it. But at the same time, according to professionals, high speed better copes with solid fruits and does not allow rapid clogging of the centrifuge. Also, the speed affects the amount of pulp in the juice - the greater the speed during operation, the more pulp is output.
7. Functional. Additional functions help in work and optimize it. Customers appreciate automatic ejection of pulp, direct supply of the finished drink, and the anti-drop system. Experts also advise you to pay attention to the presence of locks from an accidental start, protection against overloads and overheating, etc. Additional functions include the availability of various nozzles, for example, for making pasta from frozen fruits, a nozzle for chopping or slicing, and cooking noodles.
8. Noise level at work. On average, the indicator for low-cost models is 50 dB, but if there is a need for silent operation, it is better to overpay a little and get an indicator two times lower.
9. Manufacturer. Choose proven brands or low-cost brands that have not been tried out by other users - in more detail, the most popular brands will be considered in the TOP juicers listed below in the current year.
10. Power. The speed of preparation of the product depends on it. On average, this figure is 200 watts - it gives a glass of juice in about 2 minutes. Enough for home use.
11. Continuous work time. Many models have a specified maximum duration of use, after which the juicer shuts off to lower the temperature of the motor.
12. Size and weight. It is selected based on the dimensions of the kitchen and the intended storage space.

Mirandi J-100

The average cost is 18,000 rubles. One auger. Power 200 watts. The collection of fluid in a glass of 1000 ml is supplied directly. Anti-drop system. Automatic discharge of oilcake into a 1 liter tank. Plastic housing, stainless steel centrifuge mesh. The set has a cleaning brush. Legs with rubber base. It develops up to 55 rpm. Reverse system. It weighs 3 kg. Read more in the review of Mirandi J-100.

• Powerful.
• A rich set of functions and modes.
• High speed of juice production.
• Quick cleaning mode with water.
• Beautiful design.
• Touch control panel.
• It works for a long time without stopping.
• Low noise.
• Large neck of the receiver.

• High price.
• Minor design flaws.

Mirandi also has another decent Mirandi J-60 screw juicer. Its good shape allows you to conveniently place a juicer even in a small kitchen. One of the main structural elements is a special shape screw, thanks to which Mirandi squeezes the maximum amount of juice. Read more in the review of the Mirandi J-60.

ENDEVER Sigma-95

The average cost is 4,200 rubles. Equipped with one screw. Power 350 watts. The capacity for collecting a drink for 1000 ml, drains into it automatically. Anti-drop system. Automatic ejection of pulp into a 800 ml capacity. Protective mechanisms against accidental starting and overheating of the motor. The casing and centrifuge are made of stainless steel. The set includes a loading tray and a cleaning brush. Power wire 110 cm. Work at 1 speed. Reverse system.

• Good quality for a small price.
• Powerful.
• Metal mesh.
• High efficiency.
• Brush for cleaning.
• Reverse system.
• Protective systems.

• The screw is covered with plastic, which may affect the duration of its use.
• Often clogged with fibrous products.
• Glass for juice made of plastic.

See also - The 9 Best Citrus Juicers According to Customer Reviews

Kitfort KT-1101

The average price is 6,000 rubles. One auger. Power below - 150 watts. Finished raw materials are collected in a tank by a direct output system, an anti-drip mechanism. The cake comes out automatically, a protective mechanism against accidental start-up. Plastic case. In a set a tray for the loaded raw materials, a cleaning brush. The indicator of the level of the drink, the legs with the base of rubber. Power cable 120 cm. In additional functions, automatic filter cleaning system. One speed. Reverse movement. Height is 14 cm. Weight is 4.2 kg.

• Good assembly, durable auger and plastic.
• Low noise during operation.
• High-quality spin.
• Reverse movement.

• Minor design flaws.

Kitfort KT-1110

The average cost of 6,000 rubles. Power is 150 watts. The finished drink is collected in a glass; there is no direct supply system. There is a system for the automatic ejection of oilcake. Separator for reducing foam. The motor starts smoothly. Plastic housing, stainless steel centrifuge mesh. The neck in the shape of a circle. The set includes a tray for downloadable products and a cleaning brush. Legs with rubber base. Wire 119 cm. Develops up to 100 rpm. Reverse. Dimensions (W) 18, (H) 32, (D) 33.5 cm, weight 3.7 kg.

• Silent work.
• Squeezes even solid foods.
• The cake comes out almost dry.
• Beautiful design - white-orange case.
• Separator for foam.
• Reverse.
• Price.
• High speed.

• Continuous work only 15 minutes.

Hurom GI Series GI-SBE08 / BBE08 / LBE08

The average cost is 26,000 rubles. Power is 150 watts. The liquid flows into the glass using its direct feed system. Automatic ejection of cake. Overload protection. Case material - plastic. Circle feed neck. The set has a tray and 4 nozzles. Wire 140 cm. Develops up to 64 rpm. Dimensions (W) 31.9, (H) 16.1, (D) 36.7 cm Weight 4.7 kg.

• Wide functionality.
• Simple system of use and cleaning.
• Cope with any type of raw material.
• High speed.
• Overload protection.
• Silent work.

• Small loading hole.

Tribest Solostar 3

The average cost is 31,500 rubles. Power 180 watts. The drink is collected in a glass of 1 liter by an automatic system. Automatic discharge of oilcake into a 1 m tank. Separator for foam separation. The motor starts smoothly, protective systems from its accidental start. Case material - plastic.

The set includes a tray, a cleaning brush, a nozzle for mixing, for spaghetti and fettuccine. Indication of juice level. Feet with rubber pads. Wire 140 cm. Develops up to 80 rpm. The volume of pulp can be adjusted. Reverse. Dimensions (W) 47.5, (H) 24, (D) 33 cm. Weight 7 kg.

• High efficiency.
• Simple assembly.
• The cake at the exit is almost dry.
• Low noise.
• Manual drive to complement the mechanical.
• Beverage Level Indicator.
• Reverse.

• Flimsy juice and waste tanks.

Sana euj-707

The average cost is 38,000 rubles. Power is 150 watts. The drink is collected in a glass by a direct feed system. The cake is thrown away automatically. The set includes a tray, a cleaning brush, a sieve for the homogenizer, a nozzle for pasta and spaghetti. Rubber legs on the legs. It develops up to 70 rpm. The percentage of pulp is adjustable. Dimensions (W) 42, (H) 18.7, (D) 32 cm. Weight 5.7 kg.

• Powerful.
• Quietly working.
• Just assembled and disassembled.
• High quality finished juice.
• Rich equipment.
• Nice design.
• Multifunctionality.

• Marked chrome surface.

Wellra TGJ 50S

The average cost is 38,000 rubles. Power is 150 watts. The drink is served directly by the automatic system. The cake is ejected automatically. Motor overheat protection. Case material is plastic. Neck for bookmark 36 mm. In a set a tray, a grid for drinks with pulp, without it, a grinding nozzle. Feet with rubber pads. Wire 140 cm. Work at 1 speed. Speed ​​120 rpm. Reverse. Weight is 6 kg.

• Cope with any products, including greens.
• Good equipment.
• The ability to make a drink with or without pulp.
• Does not hum or vibrate.

• Two augers give a lot of foam when processing fruits.

Tribest Green Star Elite GSE-5300

The cost of 64 500 rubles. Power 200 watts. Juice is served directly in a 900 ml capacity. Automatic waste disposal. Soft start of the motor and protection against accidental starting. Case material - plastic. In the set:

• tray for downloadable products,
• cleaning brush
• sponge for making bread sticks,
• mixing nozzle
• smoothie
• for chopping meat products,
• slicing dry raw materials,
• making spices
• ice cream and fruit sorbet,
• paste,
• pasta from nuts and milk,
• live cereals
• dishes for children
• noodles.

Level indicator of the finished product. Rubber nozzles on the base. Wire 140 cm. Develops up to 110 rpm. The percentage of pulp is adjustable. Reverse system. Dimensions (W) 46.4, (H) 17.5, (D) 31.8 cm. Weight 8 kg.

• Very rich scope of delivery.
• Indication of drink level.
• High power and speed.
• Quietly working.
• Protective mechanisms.

• Turns soft fruits into mashed potatoes, works better with hard fruits and greens.

Omega TWN32

The average price is 45 500 rubles. Power is 150 watts. Juice is fed directly into the container by the automatic feeding system. Waste is disposed of automatically. In protective functions - shutdown during overheating and protection against accidental start-up. Case material - plastic. Stainless steel centrifuge mesh. The set includes a loading tray and a mesh for drinks with pulp. Feet with rubber pads. Wire 140 cm. 1 high-speed mode. Reverse system. Dimensions (W) 43.4, (H) 16.5, (D) 30.5 cm. Weight 6 kg.

• Graceful appearance.
• Simply disassembled and cleaned.
• Silent work.
• Delicious drinks from any fruit.
• Almost dry waste.
• Compact size.
• Reverse.
• Protective mechanisms.

• According to reviews, a fragile grid, plastic is cracking on it and requires replacing the element.